4pcs Cabinet Magnet Magnetic Door Catch
4pcs Cabinet Magnet Magnetic Door Catch Cabinet Magnetic Catch Door Magnet Magnetic Lock Monkey Magnets Cabinet Magnets
Suitable for most cabinet doors the cabinet door is closed to bid farewell to dust and create a cleaner and neater home,easy installation,configure 3m adhesive tape. No screws are required during installation. Tear the 3m adhesive tape and place it in the position to be installed.
Even the smallest details can create value
The thickness of the magnetic magnet without 3M adhesive on both sides is 3.5mm.
clean the position to be installed before installation, it is recommended to press for 1 minute, and then use after 24 hours; white walls, putty walls, latex paint walls can not be pasted and installed.
Scope of application
It is suitable for sliding doors, sliding doors and other cabinet doors of drawers from 1 m to 2.5 m high，Multi-scenario application Meet your many needs，No tools required, come with the back glue, tear and paste can be used.
From now on the door is not closed
Strong hiding, using the back door to close the door gap is small does not affect the appearance
the magnetic door catch strong hiding, using the back door to close the door gap is small does not affect the appearance.
These worries...Ultra-thin magnet for you
From now on the door is not closed
the magnetic door catch high quality stainless steel shell, no corrosion, no rust, not easy to deform and fade, longer service life.
Suitable for most cabinet doors the cabinet door is closed to bid farewell to dust and create a cleaner and neater home,easy installation,configure 3m adhesive tape. No screws are required during installation. Tear the 3m adhesive tape and place it in the position to be installed.
- The sliding door won't close?
- Kids open doors?
- The cabinet door is not tightly closed?
First step
use a pen to draw a line on the position to be installed
The second step
Align the hole with a Phillips screwdriver and tighten it
The third step
The other end can be fixed in the same way
Step four
Tear the white adhesive along the edge of 3M glue
The fifth step
respectively pasted on the back of the magnet cabinet (can also be screwed)
Step six
Align the pressure with the installation position(Wait 24 hours to use)
